If you’re reading this, you’ve probably heard stories about businesses spending a good amount of money on line marking only to fade and peel away in just a few weeks. If you want to make sure that your business avoids the same fate, you’d want to pay careful attention to surface preparation before line marking.
This begs the question — how exactly do you prepare concrete surfaces for line marking? In this article, we’ll go over just that and cover some of the more important things one ought to know to ensure the best possible results.
For starters, it pays to know the material that you’re dealing with. Water-based paint, solvent-based paint, and thermoplastics are amongst the most frequently utilized materials for roadway line marking. Whatever the product’s option is, you can anticipate the line-markings to perform well and last a long time if the material appropriately bonds to the surface area being marked.
How, then, does your roadway line marking specialist guarantee this appropriate bonding? Among the most significant contributors to correct adhesion and bonding is a proper surface treatment. Here are some of the surface area preparation guidelines that will ensure appropriate bonding in any line marking project.
Removal of Old Markings
Undoubtedly, among the first things to do in preparing the surface area for roadway line marking is ensuring a clean canvas to work with. This is done by eliminating any existing markings.
Applying the brand-new markings over the old will prevent the paint from sticking well onto the surface area. Additionally, the markings may wind up not looking as good. Hydroblasting is an efficient technique to eliminate the old markings without triggering any damage to the surface area.
Cleaning Up the Surface area
Dirt, dust, gunk, or any debris on the road or pavement surface area will affect how well the line marking product follows the surface. For that reason, it’s essential that the surface is spick-and-span before application.
Days before the actual road line marking, the team will use numerous cleansing methods, consisting of high-pressure washing, to eliminate any debris from the roadway surface area.
Do Line Marking Only on Dry Surfaces
Now you might be wondering — why is power washing done a few days earlier than the actual line marking? Well, doing so gives the surface enough time to dry thoroughly. This will, naturally, depend on the weather. However, the bottom line stays that the surface area must be dry before commencing line marking. The team will determine the moisture content before getting to work.
Wetness on the surface of the roadway will cause blistering in the used line marking. As a result, the markings will start to peel not too long after the application.
You can trust an expert roadway line marking business to precisely understand what to do to prepare the marking’s surface area. As mentioned, these steps are essential to ensure that the line-markings do look great and that you’d be able to get your money’s worth.